Roll-n-Go Model 4200

$3649.99 (base price)

Roll-n-Go’s Model 4200 Railway System is for boats weighing up to 4200 lbs. It has been engineered for strength, durability and simplicity. It is a ready-to-assemble marine boat rail system that is constructed of marine grade aluminum and includes stainless steel fasteners.

The boat rail kit comes complete with detailed, easy-to-follow assembly instructions. It assembles with common tools in a few hours.

The base price includes standard 2800 lb. hand winch and also has several electrical winch options available. The fully adjustable standard bunk system is upgradable to bunks that accommodate inboard drive ski/wake boats or pontoon boats.

The rails are 4″ high structural “c” channel. The basic kit comes with (4) 9 ft. track sections. Extra track sections, leg kits and angle kits are available to get your boat over rough terrain or to change angles to follow the contour of your shoreline.

The sections connect easily with specially formed brackets and Roll-n-Go has incorporated a carriage retaining system to prevent the carriage from accidentally getting knocked off the track or from rolling off the end.

The carriage contains 2 fully welded ends connected by bolt-in channels. It will accommodate any of our fully adjustable bunk systems.

The wheels are machined from solid aluminum, with bronze bushings that ride on greasable, grade 8 axle bolts for many years of smooth service. The carriage has sturdy PVC drive-in guides that adjust to 112 inches wide, over 9 feet.

The Model 4200 is a great place to store your boat over the winter on shorelines that are not subject to ice floe surges. Just winterize and cover your boat and wait for that first warm and sunny Spring day to get back onto the lake!

Please see below for a description of these options.  

Buy product

SKU: RNG42
Categories:

Description

STEP 1: SELECT A WINCH OPTION

Roll-n-Go 4200 Manual Winch for Railway Docking system

Manual Winch Shelby 2-speed 2800#, 50 ft. Cable

This is our economy AC winch. It has 2800 lb pull and comes with 50 ft cable. Upgradable length to 94 feet in case you want to add a doubler kit which gives you twice the leverage at half the speed. The winch also features two-speed options with a gear ratio choices of 5.1 : 1 and 14.7 : 1.

Roll-n-Go 4200 Strongarm Winch for Railway Docking system

AC Winch DL StrongArm SA12000 w 3 prong plug and pendant

For 3000 lb of pulling power, choose this strongest of our winches. You will need to wire this to your 110 or 220 volt power source. Wiring instructions and mountable drum switch are included. Use of a qualified electrician is recommended. This winch is considerably faster than the 2000 lb. winch. Comes with 100 ft. of cable.

Roll-n-Go 4200 3000 Winch for Railway Docking system

AC Winch Warn model 3000 ACI, 100 ft cable, 110v-220v, Mountable drum switch must be wired

No power to your shore? The DC winch on this model is super powerful and will cycle up and down easily using a deep cell marine battery. If you don’t want to cart your battery back and forth, consider adding our top quality 20 solar charging kit(added option). Includes 95 feet of cable a the hand-held controller detaches for safe keeping.

Roll-n-Go 4200 Tigershark Superwinch for Railway Docking system

DC Winch Superwinch Tigershark 9500, 100 ft cable, 12 volt (battery not included)

If your slope is 10% or less and your boat under 2500 lbs, you can crank it up with our 2800 lb, 2-speed hand winch. Comes with 50 ft. of cable, upgradable to 90 feet.

STEP 2: SELECT A BUNK OPTION

Bunk – Standard Bunk Set

The standard bunk set which comes at no additional charge is the Multi Hull Bunk set. This system will adapt to most hulls whether V-hull, tri-hull or flat bottom boats. It consists of 4 pads of quality marine grade carpeting securely fastened to pressure treated 2 x 10” lumber. The easy mounting system gives you many options for location and angles.

Bunk – High Bunk SetThe High Bunk set is identical to the Multi Hull set except its taller brackets give the clearance required for many inboard drive and v-drive boats common on ski and wake boats, and others with tracking fins.

Pontoon Bunk Set

The Pontoon Bunk set is ideal for boats with round pontoons from 19” to 27” diameter. They can be use with tri- toons, even if the center pontoon is a larger diameter. (The center pontoon will not be supported but will hang free with plenty of clearance). These bunks are constructed with marine grade carpet mounted to pressure treated lumber.

STEP 3: SELECT ACCESSORIES

Cable length upgrade for Manual Winch

Use this cable if you choose the manual winch and your total track length is longer than 60 feet or you are doubling the cable with a total track length longer than 36 feet. Avoid loading extra cable that you don’t need. With more cable on the drum, more cranking force is required.

Aluminum winch cover for electric winches

Protect your winch from direct rain and snow while allowing ventilation and access to cables, remote controls, etc. Constructed of aluminum. Quick connect fasteners require no tools for installation or removal. Compatible with all Model 4200 electric winch options.

Cable doubling kit for manual winch with 90 ft cable

This kit includes a pulley and block and other hardware to “double” your cable. This will decrease the usable distance of a given winch cable and speed by half but gives you twice the power. For use with manual winch. Electric winches come with a doubler pulley at no extra cost.

Leg kit 3 ft. One pair.

Leg kits are used when its necessary to span over rough terrain and blocking is not practical. Each kit comes with 2 – 3 ft long legs of 1 1/2 inch aluminum schedule 80 pipe along with the bracing and hardware necessary. Requires the use of a drill and 1/2″ drill bit to custom locate and plumb the legs. Rails should be supported about every 9 feet for boats under 2000 lbs and about every 4 1/2 feet for boats over 2000 lbs. Comes with 12 inch square foot plate for the base of the leg.

Leg kit 1 1/2 ft. One pair

Leg kits are used when its necessary to span over rough terrain and blocking is not practical. Each kit comes with 2 – 1 1/2Ft long legs of 1 1/2 inch aluminum schedule 80 pipe along with the bracing and hardware necessary. Requires the use of a drill and 1/2″ drill bit to custom locate and plumb the legs. Rails should be supported about every 9 feet for boats under 2000 lbs and about every 4 1/2 feet for boats over 2000 lbs. Comes with 12 inch square foot plate for the base of the leg.

Angle connector kit. 7.5 degree, pair

Replace a straight connector with this kit. Creates a 7.5 degree angle whe need to follow terrain . NOTE: YOUR RAMP SHOULD HAVE A POSITIVE ANGLE TOWARD THE WATER ALONG IT’S ENTIRE LENGTH. The system relies on gravity to move the boat into the water and to create the proper tension on the cable when rewinding.

Extra 9′ track section

Extra 9 feet track section The Base kit comes with 36 feet of track. Enter the quantity of extra 9 foot sections needed.

Solar Charger for DC Winch, 20W solar charger

20 watt solar charger system for DC Winch. Includes a 20 W panel for 12 V battery. Includes quick connect wiring system, cable ties, instructions, a charging regulator (12 volt, 3 watt for lead/acid battery), mounting arm, battery charge level indicator and all hardware. Battery not included. Size group 27 deep cycle battery recommended. Solar charging kit may ship separately.

Additional information

Winch

No Winch, Manual Winch 2-speed 2800#, 50 ft. Cable, AC Winch DL, SA12000 with 3 Prong Plug, 110v, AC Winch Warn Model 3000 ACL, 100 ft. Cable, Winch Superwinch Tigershark 9500, 100 ft. Cable, 12v

Bunk

Multi-Hull Bunk Package, High Bunk Package, Pontoon Bunk Package

Accessories

No Accessories, Cable length upgrade for Manual Winch, Aluminum winch cover for electric winches, Cable doubling kit for manual winch with 90 ft cable, Leg kit 3 ft. One pair, Leg kit 1 1/2 ft. One pair, Angle connector kit. 7.5 degree, pair, Extra 9' track section, Solar Charger for DC Winch, 20W solar charger